Safety Messages - Teledyne T360 Operation Manual

SAFETY MESSAGES

Important safety messages are provided throughout this manual for the purpose of avoiding personal
injury or instrument damage. Please read these messages carefully. Each safety message is associated
with a safety alert symbol, and are placed throughout this manual; the safety symbols are also located
inside the instrument.
descriptions of which are as follows:
This instrument should only be used for the purpose and in the manner
described in this manual. If you use this instrument in a manner other tha
That for which it was intended, unpredictable behavior could ensue with
possible hazardous consequences.
NEVER use any gas analyzer to sample combustible gas(es)!
For Technical Assistance regarding the use and maintenance of this instrument or any
other Teledyne API product, contact Teledyne API's Technical Support Department:
or access any of the service options on our website at http://www.teledyne-api.com/
07272B DCN6552
It is imperative that you pay close attention to these messages, the
WARNING: Electrical Shock Hazard
HAZARD: Strong oxidizer
GENERAL WARNING/CAUTION: Read the accompanying message for
specific information.
CAUTION: Hot Surface Warning
Do Not Touch: Touching some parts of the instrument without
protection or proper tools could result in damage to the part(s) and/or the
instrument.
Technician Symbol: All operations marked with this symbol are to be
performed by qualified maintenance personnel only.
Electrical Ground: This symbol inside the instrument marks the central
safety grounding point for the instrument.
Telephone: 800-324-5190
Email: sda_techsupport@teledyne.com
CAUTION
iii