Teledyne T360 Operation Manual page 146

Operating Instructions
4.13.4.5. AIN CALIBRATION
Instrument
calibrates
automatically
4.13.4.6. CONFIGURING ANALOG INPUTS (OPTION) CHANNELS
144
This is the sub-menu to conduct the analog input calibration. This calibration
should only be necessary after major repair such as a replacement of CPU,
motherboard or power
CONFIGURATION MENU (see Section 4.13.1), then press:
STARTING FROM ANALOG I / O CONFIGURATION MENU
DIAG ANALOG I / O CONFIGURATION
PREV NEXT
Continue pressing SET? until ...
DIAG AIO AIN CALIBRATED:
< SET SET> CAL
DIAG AIO CALIBRATING A/D ZERO
CALIBRATING A/D SPAN
DIAG AIO AIN CALIBRATED:
< SET SET> CAL
To configure the analyzer's external analog inputs option, define for each
channel:

gain (number of units represented by 1 volt)

offset (volts)

engineering units to be represented in volts (each press of the touchscreen
button scrolls the list of alphanumeric characters from A-Z and 0-9)

whether to display the channel in the Test functions
Teledyne API Model T360/T360M Operation Manual
supplies. Activate
Exit at any time to
return to the main
ENTR EXIT
NO
EXIT
YES
EXIT
the ANALOG
DIAG menu
Exit to return to the
ANALOG I/O
CONFIGURATION
MENU
07272B DCN6552
I/O