Table 3-1: Display And Touchscreen Control Description - Teledyne T360 Operation Manual

Teledyne API Model T360/T360M Operation Manual

Table 3-1: Display and Touchscreen Control Description

Field
Status LEDs indicating the states of Sample, Calibration and Fault, as follows:
Name
SAMPLE
CAL
FAULT
Displays the actual concentration of the sample gas currently being measured by the analyzer in the
Conc
currently selected units of measure
Mode Displays the name of the analyzer's current operating mode
Displays a variety of informational messages such as warning messages, operational data, test function
Param
values and response messages during interactive tasks.
Control Buttons Displays dynamic, context sensitive labels on each button, which is blank when inactive until applicable.
07272B DCN6552
Color State
Off
On
Green
Blinking
Off
Yellow On
Blinking
Off
Red
Blinking
Figure 3-3 shows how the front panel display is mapped to the menu charts
illustrated in this manual. The Mode, Param (parameters), and Conc (gas
concentration) fields in the display screen are represented across the top row of
each menu chart. The eight touchscreen control buttons along the bottom of the
display screen are represented in the bottom row of each menu chart.
Description/Function
Definition
Unit is not operating in sample mode, DAS is disabled.
Sample Mode active; Front Panel Display being updated; DAS data
being stored.
Unit is operating in sample mode, front panel display being updated,
DAS hold-off mode is ON, DAS disabled
Auto Cal disabled
Auto Cal enabled
Unit is in calibration mode
No warnings exist
Warnings exist
Getting Started
29