Teledyne T360 Operation Manual page 162

Operating Instructions
4.15.2.8. APICOM REMOTE CONTROL PROGRAM
160
940331 is the default password. To change the default password, use the variable
RS232_PASS issued as follows:
V RS232_PASS=NNNNNN
Where N is any numeral between 0 and 9.
APICOM is an easy-to-use, yet powerful interface program that allows accessing
and controlling any of Teledyne API's main line of ambient and stack-gas
instruments from a remote connection through direct cable, modem or Ethernet.
Running APICOM, a user can:
Establish a link from a remote location to the T360 through direct cable
connection via RS-232 modem or Ethernet.

View the instrument's front panel and remotely access all functions that could
be accessed when standing in front of the instrument.

Remotely edit system parameters and set points.

Download, view, graph and save data for predictive diagnostics or data
analysis.

Retrieve, view, edit, save and upload DAS configurations.

Check on system parameters for trouble-shooting and quality control.
APICOM is very helpful for initial setup, data analysis, maintenance and trouble-
shooting. Figure 4-15 shows an example of APICOM's main interface with DAS
feature; the interface emulates the look and functionality of the instrument's
actual front panel
Teledyne API Model T360/T360M Operation Manual
07272B DCN6552