Figure 8-1: Viewing And Clearing Warning Messages - Teledyne T360 Operation Manual

Troubleshooting and Service
TEST deactivates Warning
Messages until New warning(s)
are activated
Figure 8-1:
226
Teledyne API Model T360/T360M Operation Manual
SAMPLE WHEEL TEMP WARNING
TEST CAL
SAMPLE RANGE=500.00 PPM
< TST TST > CAL
SAMPLE WHEEL TEMP WARNING
< TST TST > CAL
Make sure warning messages
are not due to
legitimate problems..
Viewing and Clearing Warning Messages
CO2 = XX.XX
MSG CLR SETUP
CO2 = XX.XX
MSG CLR SETUP
CO2 = XX.XX
MSG CLR SETUP
MSG activates Warning
Messages.
<TST TST> keys replaced with
TEST key
Press CLR to clear the
message currently being
Displayed.
If more than one warning is
active the next message will
take its place
Once the last warning has been
cleared, the analyzer returns to
SAMPLE Mode
07272B DCN6552