Table of Contents
Advertisement
Safety Messages
Your safety and the safety of others are very important. We have
provided many important safety messages in this manual. Please read
these messages carefully.
A safety message alerts you to potential hazards that could hurt you
or others. Each safety message is associated with a safety alert symbol.
These symbols are found in the manual and inside the instrument. The
definition of these symbols is described below:
GENERAL WARNING/CAUTION: Refer to the instructions for
details on the specific danger. These cautions warn of
specific procedures which if not followed could cause
bodily Injury and/or damage the instrument.
CAUTION: H
S
OT
URFACE
heated components within the instrument. Failure to heed
the warning could result in serious burns to skin and
underlying tissue.
WARNING:
E
LECTRICAL
within this instrument. This warning is specific to an
electrical hazard existing at or nearby the component or
procedure under discussion. Failure to heed this warning
could result in injury and/or death from electrocution.
TECHNICIAN SYMBOL:
be performed by qualified maintenance personnel only.
NOTE:
Additional information and comments regarding a
No
specific component or procedure are highlighted in the
Symbol
form of a note.
CAUTION:
THE ANALYZER SHOULD ONLY BE USED FOR THE
PURPOSE AND IN THE MANNER DESCRIBED IN
THIS MANUAL.
Teledyne Analytical Instruments
W
: This warning is specific to
ARNING
S
H
:
Dangerous voltages appear
HOCK
AZARD
All operations marked with this symbol are to
MIXCHEK
iv
Hide quick links:
Advertisement
Table of Contents
