Teledyne T360 Operation Manual page 87

Teledyne API Model T360/T360M Operation Manual
4.7.2.4. TRIGGER EVENTS
4.7.2.5. EDITING DAS PARAMETERS
07272B DCN6552
To edit the list of data parameters associated with a specific data channel, press:
From the DATA ACQUISITION menu
(see Section 6.7.2.2)
Edit Data Channel Menu
SETUP X.X 0) CONC: ATIMER,
PREV NEXT INS DEL
SETUP X.X NAME:CONC
<SET SET> EDIT PRINT
SETUP X.X EVENT:ATIMER
<SET SET> EDIT PRINT
SETUP X.X EVENT:ATIMER
<PREV NEXT>
Press each button repeatedly to cycle through
the list of available trigger events.
Data channels can be edited individually from the front panel without affecting
other data channels. However, when editing a data channel, such as during
adding, deleting or editing parameters, all data for that particular channel will be
lost, because the DAS can store only data of one format (number of parameter
columns etc.) for any given channel. In addition, a DAS configuration can only
be uploaded remotely as an entire set of channels. Hence, remote update of the
DAS will always delete all current channels and stored data.
1, 900
EDIT PRNT EXIT
EXIT
EXIT
ENTR EXIT
Operating Instructions
Exits to the Main
Data Acquisition
menu
ENTR accepts the new string
and returns to the previous
menu.
EXIT ignores the new string
and returns to the previous
menu.
85