Teledyne T360 Operation Manual page 95

Teledyne API Model T360/T360M Operation Manual
4.7.2.13. HOLDOFF FEATURE
Toggle to turn HOLDOFF
ON or OFF
07272B DCN6552
The DAS HOLDOFF feature allows to prevent data collection during calibrations
and during the DAS_HOLDOFF period enabled and specified in the VARS
(Section 4.12). To enable or disable the HOLDOFF, follow the instruction shown
in Section 4.7.2.2 then press:
From the DATA ACQUISITION menu
(see Section 4.7.2.2)
Edit Data Channel Menu
SETUP X.X 0) CONC:
PREV NEXT INS
SETUP X.X NAME:CONC
<SET SET> EDIT PRINT
Press SET> until...
SETUP X.X CAL HOLD OFF:ON
SET> EDIT PRINT
SETUP X.X CAL HOLD OFF:ON
ON
ATIMER, 1, 900
DEL EDIT PRNT EXIT
EXIT
EXIT
ENTR EXIT
Operating Instructions
Exits to the main Data
Acquisition menu
ENTR accepts the new
setting and returns to the
previous menu.
EXIT ignores the new setting
and returns to the previous
menu.
93