Safety Messages - Teledyne T200H User Manual

SAFETY MESSAGES

This instrument should only be used for the purpose and in the manner described
in this manual. If you use this instrument in a manner other than that for which it
was intended, unpredictable behavior could ensue with possible hazardous
consequences.
For Technical Assistance regarding the use and maintenance of this instrument or any other
Teledyne API product, contact Teledyne API's Technical Support Department:
or access any of the service options on our website at http://www.teledyne-api.com/
07270D DCN7141
Important safety messages are provided throughout this manual for the purpose of
avoiding personal injury or instrument damage. Please read these messages carefully.
Each safety message is associated with a safety alert symbol, and are placed
throughout this manual; the safety symbols are also located inside the instrument. It is
imperative that you pay close attention to these messages, the descriptions of which
are as follows:
WARNING: Electrical Shock Hazard
HAZARD: Strong oxidizer
GENERAL WARNING/CAUTION: Read the accompanying message for
specific information.
CAUTION: Hot Surface Warning
Do Not Touch: Touching some parts of the instrument without
protection or proper tools could result in damage to the part(s) and/or the
instrument.
Technician Symbol: All operations marked with this symbol are to be
performed by qualified maintenance personnel only.
Electrical Ground: This symbol inside the instrument marks the central
safety grounding point for the instrument.
NEVER use any gas analyzer to sample combustible gas(es)!
Telephone: 800-324-5190
Email: sda_techsupport@teledyne.com
CAUTION
iii