Teledyne T360 Operation Manual page 61

Teledyne API Model T360/T360M Operation Manual
The CO span
2
concentration values
automatically default to
400.0 Conc.
To change this value to
the actual concentration of
the span gas, enter the
number by pressing the
button under each digit
until the expected value
appears.
For this Initial Calibration it is important to independently verify the precise CO
If the source of the Span Gas is from a Calibrated Bottle, use the exact concentration value
07272B DCN6552
2. Set the expected CO
SAMPLE* RANGE = 500.000 PPM
< TST TST > CAL
M-P CAL RANGE = 500.000 PPM
< TST TST > ZERO
M-P CAL CO2 SPAN CONC: 400.000 Conc
0 0 0
Value of the SPAN gas.
printed on the bottle.
span gas concentration
2
CO2 =X.XXX
SETUP
CO2 =X.XXX
CONC EXIT
4 5 .0 ENTR EXIT
NOTE
Getting Started
This sequence causes the
analyzer to prompt for the
expected CO span
2
concentration.
EXIT ignores the new setting
and returns to the previous
display.
ENTR accepts the new setting
and returns to the
previous display..
Concentration
2
59