Options - Teledyne T360 Operation Manual

Introduction

1.3. OPTIONS

Option
Option
Number
Pumps
11
10A
10B
10C
10D
10E
13
Rack Mount Kits
20A
20B
21
23
Carrying Strap/Handle
29
TO AVOID PERSONAL INJURY WE RECOMMEND THAT TWO PERSONS LIFT AND CARRY
THE ANALYZER. DISCONNECT ALL CABLES AND TUBING FROM THE ANALYZER BEFORE
Analog Input and USB port
64B
Current Loop Analog
Outputs
41
Parts Kits
42A
43
Calibration Valves
50A
50B
18
Description/Notes
Pumps meet all typical AC power supply standards while exhibiting same
pneumatic performance.
No pump (If one is standard either internal or external)
External Pump 100V – 120V/60Hz
External Pump 220V – 240V/50H
External Pump 220V – 240V/60Hz
External Pump 100V – 120V/50Hz
External Pump 100V /60Hz
High Voltage Internal Pump 240V/50Hz
Options for mounting the analyzer in standard 19" racks
Rack mount brackets with 26 in. (660 mm) chassis slides
Rack mount brackets with 24 in. (610 mm) chassis slides
Rack mount brackets only (compatible with carrying strap, Option 29)
Rack mount for external pump pack (no slides)
Side-mounted strap for hand-carrying analyzer
Extends from "flat" position to accommodate hand for carrying.
Recesses to 9mm (3/8") dimension for storage.
Can be used with rack mount brackets, Option 21.
Cannot be used with rack mount slides.
CAUTION – GENERAL SAFETY HAZARD
THE T360 OR T360M ANALYZER WEIGHS ABOUT 18 KG (40 POUNDS).
Used for connecting external voltage signals from other instrumentation (such as
meteorological instruments).
Also can be used for logging these signals in the analyzer's internal DAS
Adds isolated, voltage-to-current conversion circuitry to the analyzer's analog
outputs.
Can be configured for any output range between 0 and 20 mA.
May be ordered separately for any of the analog outputs.
Can be installed at the factory or retrofitted in the field.
Spare parts and expendables
Expendables Kit for analyzer includes a recommended set of expendables for one
year of operation.
Expendables Kit for Internal Zero/Span, one year of operation.
Used to control the flow of calibration gases generated from external sources,
rather than manually switching the rear panel pneumatic connections.
AMBIENT ZERO AND AMBIENT SPAN VALVES
Zero Air and Span Gas input supplied at ambient pressure.
Gases controlled by 2 internal valves; SAMPLE/CAL & ZERO/SPAN.
AMBIENT ZERO AND PRESSURIZED SPAN VALVES
Zero Air supplied at ambient pressure. Span gas supplied from pressurized bottle of cal gas.
Teledyne API Model T360/T360M Operation Manual
MOVING IT.
07272B DCN6552