Table 4-29: Teledyne Api Hessen Protocol Response Modes - Teledyne T360 Operation Manual

Teledyne API Model T360/T360M Operation Manual
4.15.4.5. SETTING THE HESSEN PROTOCOL RESPONSE MODE

Table 4-29: Teledyne API Hessen Protocol Response Modes

MODE ID
CMD This is the Default Setting. Reponses from the instrument are encoded as the traditional command
format. Style and format of responses depend on exact coding of the initiating command.
BCC Responses from the instrument are always delimited with <STX> (at the beginning of the response,
<ETX> (at the end of the response followed by a 2 digit Block Check Code (checksum), regardless
of the command encoding.
TEXT Responses from the instrument are always delimited with <CR> at the beginning and the end of the
string, regardless of the command encoding.
SAMPLE* RANGE = 500.000 PPM
< TST TST > CAL
SETUP X.X PRIMARY SETUP MENU
CFG DAS RNGE PASS CLK MORE
SETUP X.X SECONDARY SETUP MENU
COMM VARS DIAG ALRM
4.15.4.6. HESSEN PROTOCOL GAS ID
07272B DCN6552
The Teledyne API implementation of Hessen Protocol allows the user to choose
one of several different modes of response for the analyzer.
To Select a Hessen response mode, press:
CO2 =X.XXX
SETUP
SETUP X.X
ID INET
EXIT
SETUP X.X
EXIT
SETUP X.X
<SET
Press to
change
SETUP X.X
response
mode.
BCC TEXT EDIT
The Model T360 Analyzer is a single gas instrument that measures CO
it's default gas ID has already been set to 310. There is no need to change this
setting.
MODE DESCRIPTION
COMMUNICATIONS MENU
HESN COM1 COM2
HESSEN VARIATION: TYPE 1
SET> EDIT
HESSEN RESPONSE MODE :CMD
SET> EDIT
HESSEN RESPONSE MODE :CMD
Operating Instructions
EXIT
EXIT
ENTR accepts the new
settings
EXIT ignores the new
settings
EXIT
ENTR EXIT
. As such
2
165