Table of Contents
Advertisement
Teledyne API Model T360/T360M Operation Manual
4.15.2. Remote Operation Using the External Serial I/O
4.15.2.1. TERMINAL OPERATING MODES
4.15.2.2. HELP COMMANDS IN TERMINAL MODE
Table 4-25: Terminal Mode Software Commands
COMMAND
Control-T
Switches the analyzer to terminal mode (echo, edit). If mode flags 1 & 2 are OFF, the
interface can be used in interactive mode with a terminal emulation program.
Control-C
Switches the analyzer to computer mode (no echo, no edit).
CR
A carriage return is required after each command line is typed into the terminal/computer.
(carriage return)
The command will not be sent to the analyzer to be executed until this is done. On personal
computers, this is achieved by pressing the ENTER button.
BS
Erases one character to the left of the cursor location.
(backspace)
ESC
Erases the entire command line.
(escape)
? [ID] CR
This command prints a complete list of available commands along with the definitions of
their functionality to the display device of the terminal or computer being used. The ID
number of the analyzer is only necessary if multiple analyzers are on the same
communications line, such as the multi-drop setup.
Control-C
Pauses the listing of commands.
Control-P
Restarts the listing of commands.
07272B DCN6552
The Model T360 can be remotely configured, calibrated or queried for stored data
through the serial ports.
communication schemes, the analyzer supports two communicate modes
specifically designed to interface with these two types of devices.
Computer mode is used when the analyzer is connected to a computer with
a dedicated interface program such as APICOM. More information regarding
APICOM can be found in later in this or on the Teledyne API website at
http://www.teledyne-api.com/software/apicom/.
Interactive mode is used with a terminal emulation programs such as
HyperTerminal or a "dumb" computer terminal. The commands that are used
to operate the analyzer in this mode are listed in Table 4-25.
As terminals and computers use different
Function
Operating Instructions
155
Advertisement
Table of Contents
