Teledyne T360 Operation Manual page 88

Operating Instructions
YES will delete
all data in that
entire channel.
Moves the
display between
existing
Parameters
Inserts a new Parameter
before the currently
displayed Parameter
86
To modify, add or delete a parameter, follow the instruction shown in Section
4.7.2.2 then press:
From the DATA ACQUISITION menu
(SETUP> DAS)
Edit Data Channel Menu
SETUP X.X 0) CONC:
PREV NEXT INS DEL
SETUP X.X NAME:CONC
<SET SET> EDIT PRINT
Press SET> button until...
SETUP X.X PARAMETERS:1
<SET SET> EDIT
SETUP X.X EDIT PARAMS (DELETE DATA)
YES NO
SETUP X.X 0) PARAM=CONC1, MODE=AVG
PREV NEXT INS DEL EDIT
Deletes the Parameter
currently displayed.
Teledyne API Model T360/T360M Operation Manual
ATIMER, 1, 900
EDIT PRNT EXIT
EXIT
PRINT EXIT
Edit Data Parameter Menu
EXIT
Exits to the main
Data Acquisition
menu
NO returns to
the previous
menu and
retains all data.
Exits to the main
Data Acquisition
menu
Use to configure
the functions for
this Parameter.
07272B DCN6552