Teledyne T360 Operation Manual page 93

Teledyne API Model T360/T360M Operation Manual
4.7.2.9. RS-232 REPORT FUNCTION
Toggle to turn
reporting ON or OFF
4.7.2.10. COMPACT REPORT
4.7.2.11. STARTING DATE
07272B DCN6552
The T360 DAS can automatically report data to the communications ports, where
they can be captured with a terminal emulation program or simply viewed by the
user.
To enable automatic COM port reporting, follow the instruction shown in Section
4.7.2.2 then press:
From the DATA ACQUISITION menu
(see Section 4.7.2.2)
Edit Data Channel Menu
SETUP X.X 0) CONC:
PREV NEXT INS DEL
SETUP X.X NAME:CONC
<SET SET> EDIT
Press SET> key until...
SETUP X.X RS-232 REPORT: OFF
<SET SET> EDIT
SETUP X.X RS-232 REPORT: OFF
OFF
When enabled, this option avoids unnecessary line breaks on all RS-232 reports.
Instead of reporting each parameter in one channel on a separate line, up to five
parameters are reported in one line.
This option allows to specify a starting date for any given channel in case the user
wants to start data acquisition only after a certain time and date. If the Starting
Date is in the past, the DAS ignores this setting.
ATIMER, 1, 900
EDIT PRNT EXIT
PRINT EXIT
PRINT EXIT
ENTR EXIT
Operating Instructions
Exits to the main
Data Acquisition
menu
ENTR accepts the new
setting and returns to the
previous menu.
EXIT ignores the new setting
and returns to the previous
menu.
91