Teledyne T360 Operation Manual page 166

Operating Instructions
4.15.4.4. SELECTING A HESSEN PROTOCOL TYPE
SAMPLE* RANGE = 500.000 PPM
< TST TST > CAL
SETUP X.X PRIMARY SETUP MENU
CFG DAS RNGE PASS CLK MORE
SETUP X.X SECONDARY SETUP MENU
COMM VARS DIAG ALRM
While Hessen Protocol Mode can be activated independently for COM1 and COM2, The TYPE
164
Currently there are two versions of Hessen Protocol in use.
implementation, referred to as TYPE 1, and a more recently released version,
TYPE 2 that has more flexibility when operating with instruments that can
measure more than one type of gas. For more specific information about the
difference between TYPE 1and TYPE 2 download the Manual Addendum for
Hessen Protocol from the Teledyne API web site: http://www.teledyne-
api.com/manuals/index.asp .
To select a Hessen Protocol Type press:
CO2 =X.XXX
SETUP
EXIT
EXIT
Press to change
protocol type.
selection affects both Ports.
Teledyne API Model T360/T360M Operation Manual
SETUP X.X COMMUNICATIONS MENU
ID INET HESN COM1 COM2
SETUP X. HESSEN VARIATION: TYPE 1
SET> EDIT
SETUP X.X HESSEN VARIATION: TYPE 1
TYE1 TYPE 2
SETUP X.X HESSEN VARIATION: TYPE 2
PREV NEXT OFF
NOTE
The original
EXIT
EXIT
ENTR accepts the new
settings
EXIT ignores the new
settings
ENTR EXIT
ENTR EXIT
07272B DCN6552