Hydraulic Specifications - Genie GS-2669 RT Service Manual

November 2014

Hydraulic Specifications

Hydraulic Oil Specifications
Hydraulic oil type Chevron Rando HD MV equivalent
Viscosity grade
Viscosity index
Cleanliness level, minimum
Water content, maximum
Chevron Rando HD MV oil is fully compatible and
mixable with Shell Donax TG (Dexron III) oils.
Genie specifications require hydraulic oils which are
designed to give maximum protection to hydraulic
systems, have the ability to perform over a wide
temperature range, and the viscosity index should
exceed 140. They should provide excellent antiwear,
oxidation, corrosion inhibition, seal conditioning, and
foam and aeration suppression properties.
Optional fluids
Biodegradable
Fire resistant
Mineral based
Part No. 229753
Multi-viscosity
15/13
200 ppm
Petro Canada Environ MV 46
Statoil Hydra Way Bio Pa 32
BP Biohyd SE-S
UCON Hydrolube HP-5046
Quintolubric 822
Shell Tellus S2 V 32
Shell Tellus S2 V 46
Chevron Aviation A
Arnica 32
GS-2669 RT • GS-3369 RT • GS-4069 RT
Note: Use Chevron Aviation A hydraulic fluid when
200
ambient temperatures are consistently below
0°F / -17°C.
Note: Use Shell Tellus S2 V 46 hydraulic oil when
oil temperatures consistently exceed 205°F / 96°C.
Note: Genie specifications require additional
equipment and special installation instructions for
the approved optional fluids. Consult the Genie
Service Department before use.
Continuous improvement of our products is a
Genie policy. Product specifications are subject
to change without notice.
Section 2 • Specifications
SPECIFICATIONS
Continued use of Chevron Aviation
A hydraulic fluid when ambient
temperatures are consistently
above 32°F / 0°C may result in
component damage.
2 - 3