Genie GS-2669 RT Service Manual page 127

November 2014
34 Pull out the red Emergency Stop button to the
on position and raise the platform approximately
10 feet / 3m.
35 Return the safety arm to the stowed position.
36 Lower the platform to the stowed position.
37 Push in the red Emergency Stop button to the
off position.
38 Press and hold both the blue platform up and
yellow platform down buttons. Pull out the red
Emergency Stop button to the on position at the
ground controls.
Result: is showing in the diagnostic
TUNE SPEEDS
display window.
39 Use the yellow platform down arrow to scroll to
select options.
Result:
SELECT OPTIONS
diagnostic display window. The ECM is now in
programming mode.
40 Press the lift function enable button.
Result:
DESCENT DELAY
diagnostic display window.
41 Press the lift function enable button to
deactivate the descent delay option.
42 Use the yellow platform down arrow to scroll to
overload.
Result:
OVERLOAD ON
display window.
43 Press the lift function enable button to
deactivate the overload option.
Part No. 229753
is showing in the
is showing in the
is showing in the diagnostic
GS-2669 RT • GS-3369 RT • GS-4069 RT
Section 4 • Repair Procedures
44 Use the yellow platform down arrow to scroll to
return to the main menu.
Result:
RETURN TO MAIN MENU
diagnostic display window.
45 Press the lift function enable button.
Result:
SELECT OPTIONS
diagnostic display window.
46 Push in the red Emergency Stop button to the
off position at the ground controls.
MANIFOLDS
is showing in the
is showing in the
4 - 57