Genie GS-2669 RT Service Manual page 109

November 2014
4 Use the yellow platform down arrow to scroll to
select options.
Result:
SELECT OPTIONS
diagnostic display window. The ECM is now in
programming mode.
5 Press the lift function enable button.
Result:
DESCENT DELAY
diagnostic display window. Press the lift
function enable button to activate or deactivate
the descent delay option.
Note: For CE and AS models, the descent delay
option should be activated or in the
6 Use the yellow platform down arrow to scroll to
motion alarm.
Result:
MOTION ALARM
diagnostic display window.
7 Press the lift function enable button to activate
or deactivate the motion alarm option OR use
the yellow platform down arrow to scroll to
motion beacon.
Result:
MOTION BEACON
diagnostic display window.
8 Press the lift function enable button to activate
or deactivate the motion beacon option.
Note: For this option to function correctly, the
machine must be equipped with flashing beacons.
Note: If the machine is not equipped with flashing
beacons and this option is set to on, the ECU will
display a 4021 fault code.
Part No. 229753
is showing in the
is showing in the
position.
ON
is showing in the
is showing in the
GS-2669 RT • GS-3369 RT • GS-4069 RT
Section 4 • Repair Procedures
9 Models with platform overload (option): Use
the yellow platform down arrow to scroll to
overload.
Result:
OVERLOAD ON
display window.
Result:
OVERLOAD OFF
display window. Press the lift function enable
button to activate the overload option.
Note: For CE and AS models, the overload option
should be activated or in the
10 Use the yellow platform down arrow to scroll to
beacons option.
Result: is showing in the diagnostic
BEACONS ON
display window. Press the lift function enable
button to activate or deactivate the beacons
option.
Note: For this option to function, the machine must
be equipped with flashing beacons and the software
set to .
BEACONS ON
Note: If the machine is not equipped with flashing
beacons and this option is set to on, the ECU will
display a 4021 fault code.
11 Use the yellow platform down arrow to scroll to
generator option.
Result:
GENERATOR ON
display window. Press the lift function enable
button to activate or deactivate the generator
option.
Note: For this option to function correctly, the
machine must be equipped with the required
generator components and the software set to
.
GENERATOR ON
GROUND CONTROLS
is showing in the diagnostic
is showing in the diagnostic
position.
ON
is showing in the diagnostic
4 - 39