Genie GS-2669 RT Service Manual page 107

November 2014
How to Adjust the
Lift Speed
1 Pull out the red Emergency Stop button to the
on position at the platform controls.
2 Push in the red Emergency Stop button to the
off position at the ground controls.
3 Turn the key switch to ground control.
4 Press and hold both the blue platform up and
yellow platform down buttons. Pull out the red
Emergency Stop button to the on position at the
ground controls.
Result:
TUNE SPEEDS
display window. The ECM is now in
programming mode.
5 Press the lift function enable button.
6 Use the yellow platform down arrow to scroll to
max lift speed.
Result:
MAX LIFT SPEED
diagnostic display window.
7 Press the lift function enable button.
Part No. 229753
is showing in the diagnostic
is showing in the
GS-2669 RT • GS-3369 RT • GS-4069 RT
Section 4 • Repair Procedures
a
a diagnostic display
b blue platform up button
c lift function enable button
d yellow platform down button
8 Press the yellow platform down button to
decrease the maximum lift speed or press the
blue platform up button to increase the
maximum lift speed. Refer to Section 2,
Specifications .
9 Press the lift function enable button.
10 Push in the red Emergency Stop button to the
off position at the ground controls.
11 Check the lift speed of the machine. Refer to
Section 2, Specifications .
GROUND CONTROLS
b
c
d
4 - 37