Platform Extension Deck - Genie GS-2669 RT Service Manual

Section 4 • Repair Procedures
PLATFORM COMPONENTS
8 Carefully lift the platform enough to clear the
platform pivot.
9 Slide the platform towards the non-steer end of
the machine until the slider blocks are visible
underneath the slider block channel.
10 Carefully lift the platform off of the machine and
place it on a structure capable of supporting it.
Crushing hazard. The platform will
become unbalanced and fall when
removed from the machine if not
properly supported.
Note: Note the position of the slider blocks before
the platform is removed so that when the platform
is installed they will be in the correct position.
4 - 4 GS-2669 RT • GS-3369 RT • GS-4069 RT
2-2

Platform Extension Deck

How to Remove the Platform
Extension Deck
1 Remove the retaining fasteners from the deck
catch and remove the deck catch.
2 Remove the retaining fasteners from the deck
stop and remove the deck stop.
3 Repeat steps 1 and 2 for the other side of the
platform.
a
b
a deck catch
b deck stop
November 2014
Part No. 229753