Genie GS-2669 RT Service Manual page 161

November 2014
Observe and Obey:
Troubleshooting and repair procedures shall be
completed by a person trained and qualified on
the repair of this machine.
Immediately tag and remove from service a
damaged or malfunctioning machine.
Repair any machine damage or malfunction
before operating the machine.
Before Troubleshooting:
Read, understand and obey the safety rules
and operating instructions in the appropriate
operator's manual on your machine.
Be sure that all necessary tools and test
equipment are available and ready for use.
Part No. 229753 GS-2669 RT • GS-3369 RT • GS-4069 RT
Schematics
About This Section
There are two groups of schematics in this section.
Electrical Schematics
Electrocution/burn hazard. Contact
with electrically charged circuits
could result in death or serious
injury. Remove all rings, watches
and other jewelry.
Hydraulic Schematics
Bodily injury hazard. Spraying
hydraulic oil can penetrate and
burn skin. Loosen hydraulic
connections very slowly to allow
the oil pressure to dissipate
gradually. Do not allow oil to squirt
or spray.
General Repair Process
Identify
Malfunction
discovered symptoms
problem
still exists
Return to Inspect
service and test
problem
solved
Section 6 • Schematics
Troubleshoot
Perform
repair
6 - 1