Genie GS-2669 RT Service Manual page 104

Section 4 • Repair Procedures
GROUND CONTROLS
How to Adjust the
Stowed Drive Speed
Tip-over hazard. Do not adjust the
lift and/or drive speed higher than
specified in this procedure. Setting
drive speed greater than
specifications could cause the
machine to tip over resulting in
death or serious injury.
1 Pull out the red Emergency Stop button to the
on position at the platform controls.
2 Push in the red Emergency Stop button to the
off position at the ground controls.
3 Turn the key switch to ground control.
4 Press and hold both the blue platform up and
yellow platform down buttons. Pull out the red
Emergency Stop button to the on position at the
ground controls.
Result:
TUNE SPEEDS
display window. The ECM is now in
programming mode.
5 Press the lift function enable button.
6 Use the yellow platform down arrow to scroll to
max fwd high speed drive.
Result:
MAX FWD HIGH SPEED DRIVE
the diagnostic display window.
7 Press the lift function enable button.
8 Press the yellow platform down button to
decrease the drive speed or press the blue
platform up button to increase the drive speed.
Refer to Section 2, Specifications .
4 - 34
is showing in the diagnostic
is showing in
GS-2669 RT • GS-3369 RT • GS-4069 RT
a
a diagnostic display
b blue platform up button
c lift function enable button
d yellow platform down button
9 Press the lift function enable button.
Result:
MAX FWD HIGH SPEED DRIVE
diagnostic display window.
10 Use the yellow platform down arrow to scroll to
max rev high speed drive.
Result:
MAX REV HIGH SPEED DRIVE
the diagnostic display window.
11 Press the lift function enable button.
12 Press the yellow platform down button to
decrease the drive speed or press the blue
platform up button to increase the drive speed.
Refer to Section 2, Specifications .
13 Press the lift function enable button.
14 Push in the red Emergency Stop button to the
off position at the ground controls.
15 Check the stowed drive speed of the machine.
Refer to the Maintenance procedure B-10, Test
the Drive Speed - Stowed Position .
November 2014
b
c
d
is showing in the
is showing in
Part No. 229753