Hydraulic Oil Specifications - Genie Z-34/22IC Service Manual

July 2007
REV A

Hydraulic Oil Specifications

Hydraulic Oil Specifications
Before serial number 3335
Hydraulic oil type
After serial number 3334
Hydraulic oil type
Viscosity grade
Viscosity index
Cleanliness level, minimum
Water content, maximum
Chevron Rykon MV oil is fully compatible and
mixable with Shell Donax TG (Dexron III) oils.
Genie specifications require hydraulic oils which are
designed to give maximum protection to hydraulic
systems, have the ability to perform over a wide
temperature range, and the viscosity index should
exceed 140. They should provide excellent antiwear,
oxidation, corrosion inhibition, seal conditioning, and
foam and aeration suppression properties.
Optional fluids
Biodegradable
Fire resistant
Mineral based
Part No. 128267
Shell Donax TG (Dexron III)
Chevron Rykon MV equivalent
Multi-viscosity
15/13
200 ppm
Petro Canada Environ MV46
Statoil Hydra Way Bio Pa 32
BP Biohyd SE-S
UCON Hydrolube HP-5046
Quintolubric 822
Shell Tellus T32
Shell Tellus T46
Chevron Aviation A
Note: Use Chevron Aviation A hydraulic fluid when
ambient temperatures are consistently below
0°F / -18°C.
200 Note: Use Shell Tellus T46 hydraulic oil when oil
temperatures consistently exceed 205°F / 96°C.
Note: Genie specifications require additional
equipment and special installation instructions for
the approved optional fluids. Consult the Genie
Industries Service Department before use.
Z-34/22 IC
Section 2 • Specifications
SPECIFICATIONS
Continued use of Chevron
Aviation A hydraulic fluid when
ambient temperatures are
consistently above 32°F / 0°C may
result in component damage.
2 - 3