Safety Integrated Overview - Checksums - Siemens SINUMERIK Series Function Manual

Commissioning - drive-based
3.7 Safety overview
● Status symbols:
The parameters are evaluated through two channels. The status symbols indicate as to
whether the parameters are identical in both channels.
– Green: Parameterization identical in the 1st and 2nd monitoring channels
– Red: Parameterization different in the 1st and 2nd monitoring channels
● Control
The control of the particular safety function is displayed in the right-hand column. The
control is determined from parameter p9601.
3.7.4

Safety Integrated overview - checksums

In the "Overview-checksums" window, all of the safety reference and actual checksums are
displayed for the axes and drives.
Figure 3-4
Status symbols are used to flag differences between reference and actual checksums:
● Green: Reference and actual checksums are identical
● Red: Reference and actual checksums are different
60
Overview-checksums
Function Manual, 10/2015, 6FC5397-3EP40-5BA3
Safety Integrated