Siemens SINUMERIK Series Function Manual page 130

Commissioning - acceptance tests
5.3 Sequence of an acceptance test
● Save results
Saves the results in a directory.
● Load results
Loads the saved results from a directory. This function is useful if the test is exited before
completion and you wish to continue at the position where you left off.
● Start new test
Starts an additional test in the currently displayed setting area.
● Repeat test
Repeats a selected test in the currently displayed setting area.
● Delete test
Deletes the currently marked test.
● Go to overview
Jumps from the current setting area into the "Overview" setting area.
● Go to finished
Skips the following setting area and jumps directly to the "Finished" setting area.
● Display trace
Displays a trace.
130
Function Manual, 10/2015, 6FC5397-3EP40-5BA3
Safety Integrated