Siemens SINUMERIK Series Function Manual page 140

Commissioning - application example
6.3 Parameterizing the TM54F
Figure 6-4
Assign the extended functions to the fail-safe inputs (F-DI) for each group.
Note
For further details and information on how to parameterize this function, see Section
Configuring the TM54F (Page 102).
Some Extended Functions are assigned fixed levels, e.g. STO is not used in group 1 for the
feed axes. In this case, the function must be permanently deselected or have level "1", i.e.
"255 statically inactive". On the other hand, one of the 4 SLS values is always active, when
nothing with higher priority is active. In this case, the function must be permanently selected
or have level "0", i.e. "0 statically active". This fact is illustrated in the following diagram for the
feed axes:
140
TM54F: Assignment of the drives to the drive groups
Function Manual, 10/2015, 6FC5397-3EP40-5BA3
Safety Integrated