Siemens SINUMERIK Series Function Manual page 55

Confirm SI data
Alternatively:
Safety Integrated
Function Manual, 10/2015, 6FC5397-3EP40-5BA3
1. The commissioning mode is active. You wish to confirm the SI data ac‐
quired and exit the commissioning mode.
Press the ">>" softkey to display the softkeys of the second vertical soft‐
key bar.
2. Press the "Confirm SI data" softkey.
A prompt "Confirm SI data" is then displayed.
Here, you can define whether the SI data should be only confirmed for
the actual drive - or for all of the available drives. With the confirmation,
the commissioning mode is exited.
3. Press the "OK" softkey to activate the SI data for the actual drive.
- OR -
Press the "Confirm all drives" softkey to confirm the SI data of all the
available drives.
The commissioning mode is exited.
Press the "Cancel" softkey.
Confirming SI data is canceled. The commissioning mode remains active.
Commissioning - drive-based
3.5 Copying or confirming SI data
55