Inputs - Siemens SINUMERIK Series Function Manual

4.5.3

Inputs

The input terminals of the actual TM54F are shown in the the "Inputs" window. This involves
the following terminals:
● X521
● X522
● X531
● X532
These terminals are on the front side of the module. The terminals are displayed one above
the other in the window.
You can reach the lower terminals by scrolling (page up/page down). Alternatively, using the
"Select terminal" softkey, you can open a selection and select the terminal that is to be
displayed in the window.
You can make the following settings in the "Inputs" window:
Figure 4-4
Safety Integrated
Function Manual, 10/2015, 6FC5397-3EP40-5BA3
TM54F inputs
Commissioning - TM54F
4.5 Configuring the TM54F
105