Safety Integrated Alarms - Siemens SINUMERIK Series Function Manual

7.6

Safety Integrated alarms

The following alarms can occur for drive-based Safety Integrated:
201600 - 201799
230600 - 230799
400000 - 400022
In the basic setting, the alarm list in the "Alarms" window only lists Safety Integrated alarms.
You can change the view so that all alarms are listed (unfiltered) using the "All alarms" softkey.
Figure 7-12
Note
Display in SINUMERIK Operate
When SINAMICS faults and alarms related to Safety Integrated, which are visible in STARTER,
are not displayed in SINUMERIK Operate , then you can adapt the following machine data:
MD13150 $MNS_SINAMICS_ALARM_MASK.
The display of SINAMICS faults and alarms at SINUMERIK Operate is controlled using
parameter p3117 = 1 according to the default setting.
References
You can find detailed information about the alarms in the SINUMERIK 828D Diagnostics
Manual "Alarms".
Safety Integrated
Function Manual, 10/2015, 6FC5397-3EP40-5BA3
Safety Integrated: Faults and alarms
PLC alarms
Diagnostics: Alarms
Diagnostics
7.6 Safety Integrated alarms
179