Siemens SIMATIC S7-300 Manual page 6

Preface
User requirements
The present manual describes the hardware and functions of the FM 354
To set up, program and start up a SIMATIC S7-300 with the FM 354, you
will need a knowledge of:
FM 354 users
The structure and presentation of the information in the manual are oriented
to the intended uses of the FM 354, and the user's own activity.
It distinguishes among the following:
ii
Reference information and appendices for finding factual information
(module functions, programming guide, interface signals, parameter lists,
error handling, technical specifications, standard HMI user interface)
List of abbreviations and index for looking up information.
The SIMATIC S7
Installation manual S7-400/M7–400 Programmable Controller, Hardware
and Installation
Your programming device (PG)
How to perform programming with STEP 7
How to configure a operator panel interface.
Installation
These activities include installation and wiring of the FM 354.
Programming
These activities include parameterizing and programming the FM 354.
Troubleshooting and diagnostics
These activities include detecting and correcting faults and errors
– in the hardware setup of the module and its components
– and in the programming, handling and control of module functions.
Operation
These users operate the FM 354. The operator accordingly deals only with
the control of positioning tasks.
FM 354 Servo Drive Positioning Module