Table of Contents
Advertisement
Chapter 8. TRANSEC Module
8.1
TRANSEC Module Overview
The DMD1050TS Satellite Modem Board is equipped with the optional FIPs 140 Level 2 certified
TRANSEC Module Interface. The TRANSEC Module operates in standalone mode with the
DMD1050TS Base Modem board.
The DMD1050TS is fully compatible and interoperable in all specified modes of operation, with
KIV-19 Provisional and KG-95-1 Provisional TRANSEC equipment used by the Government.
EIA-422 data rates higher than 20 Mbps (for complete interoperability with the
KG-95-1) are provisional.
For either configuration, the TRANSEC Module Interface provides a proxy function of HTTPS
connections to the Base Modem. Thus, a secure HTTPS connection to the TRANSEC Module
allows secure user access to all Base Modem parameters through this indirect proxy connection.
The secure management interfaces supported by the TRANSEC Module Interface are listed as
follows:
HTTPS (Proxy via TRANSEC Module) SNMPv3
8.2
TRANSEC Module HTTPS Interface
The user can fully control and monitor operation of the DMD1050TS TRANSEC Module from its
HTTPS (Secure HTTP) Interface.
The pages in the DMD1050TS TRANSEC Module HTTPS Interface have been designed for
optimal performance when using Microsoft's Internet Explorer Ver. 7.0 or higher, or Mozilla
Firefox Ver. 2.0 or higher. The examples use Internet Explorer Ver. 7.0.
8.3
Open the TRANSEC Module HTTPS Interface
From the PC, type the IP address of the DMD1050TS TRANSEC Module into the Address area
of the Web browser. In the example, www.xxx.yyy.zzz represents the IP address of TRANSEC
Module.
TRANSEC Module HTTPS Interface
Base Modem
DMD1050TS Satellite Modem Board
HTTPS Interface
TRANSEC Module
HTTPS
SSH
8–1
Revision 1
MN-DMD1050TS
Advertisement
Chapters
Table of Contents
