The Main Menu is the CLI's primary navigation screen. All selections open submenus. See Table
9-1.
Submenu
Configuration
Module Status
Event Log
Unit Info
Comtech EF Data
Information
9.2.4 Configuration Menu [C]
TRANSEC Module SSH CLI Operation
Table 9-1. CLI Submenus
Entry
The Configuration Menu screen lets you configure the TRANSEC Module
C
encryption features.
The Module Status screen has no other menus. This read-only screen shows the
M
TRANSEC Module's existing operating parameters.
Opens the Event Log screen. Use it to monitor and control operational faults and
E
alarms.
Opens the Unit Info screen. Use it to to change the firmware bootup settings and
I
system reboot controls.
Opens the Comtech EF Data Information screen. It has no other menus. This read-
Z
only screen gives customer support contact information.
Figure 9-3. Configuration Menu Example
DMD1050TS Satellite Modem Board
Function/Description
9–5
Revision 1
MN-DMD1050TS