Enter The Upgrade Code - Comtech EF Data DMD1050TS Installation And Operation Manual

H.4.4 Enter the Upgrade Code
CAUTION
Make sure to enter the code correctly. After three unsuccessful attempts to enter
a code, the modem locks out the upgrade and demonstration capability. To
continue after the lock out, you must cycle power on the modem.
1. Enter the upgrade code from the terminal port:
a.
b.
c.
d.
If the code entered is correct, the CODE ACCEPTED message shows. The modem upgrade is
finished.
Otherwise, the INVALID CODE message shows. Repeat all of Step 1, and make sure the code
entered is correct.
Appendix H
On the Enter Selection Number line, type 45
Press Enter
Enter the new code
Press Enter
DMD1050TS Satellite Modem Board
H–2
Revision 1
MN-DMD1050TS