Table of Contents
Advertisement
9.2.4.4
Configuration | Network Menu [N]
Menu Options/Fields
Secure Management
IP
Subnet Bits
Gateway IP
TRANSEC Module SSH CLI Operation
Figure 9-7. Network Menu Example
Table 9-6. Network Menu Options
Entry
Change the TRANSEC Module IP address as necessary.
Note: If this address is changed, you must repeat the login process for the SSH
M
interface, using the new IP address, to regain access to the TRANSEC Module
SSH CLI.
B
Change the IP subnet mask of the TRANSEC Module as necessary.
Change the TRANSEC Module IP gateway address as necessary.
Note: If this address is changed, it must match the subnet of the Secure
G
Management IP. If it does not match, then the Gateway IP text box will default to
0.0.0.0.
9–10
DMD1050TS Satellite Modem Board
Description
Revision 1
MN-DMD1050TS
Advertisement
Chapters
Table of Contents
