Table 9-3. Active Encryption Key Menu Options - Comtech EF Data DMD1050TS Installation And Operation Manual

9.2.4.1 Configuration | Active Encryption Key Menu [A]
Menu Options/Fields
[Key Signature]
Seed Key
Confirm Seed Key
[Seed Key fields]
Passphrase
[Current TEK]
Next TEK
TRANSEC Module SSH CLI Operation
Figure 9-4. Active Encryption Key Menu Example

Table 9-3. Active Encryption Key Menu Options

Entry
The active Key Signature is shown here.
[RO]
Enter a 32-character active Seed Key to generate a TEK when the TRANSEC
K
Module is given a Passphrase.
C Confirm the active Seed Key .
[RO] Shows the status of the active Seed Key in real time.
Enter a 10- to 32-character Passphrase that is combined with the active Seed
P
Key to generate TEKs.
Identifies the Current TEK (1 through 26).
[RO]
Generates the next available TEK; the Current TEK field updates accordingly.
Note: This command is disabled when the module is in secondary mode, and
N
the Current TEK mirrors the TEK used by the connected primary modem.
9–7
DMD1050TS Satellite Modem Board
Description/User Prompt
Revision 1
MN-DMD1050TS