Table 7-5. Network Specifications - Comtech EF Data DMD1050TS Installation And Operation Manual

Transmit / General / IF Page
Spread Factor
Spread Poly
Spread Chip Rate
Spread Gsn
Network Specs
MIL 188 165A
IDR (IESS-308)
(optional)
IBS (IESS-309)
(optional)
Drop & Insert
(optional)
EBEM (EBEM)
(optional)
DVB SAT
(EN301-201 and
EN300-421)
Closed Net
Web Browser
DISABLED
•
FACTOR x2
•
FACTOR, x4
•
FACTOR x8
•
FACTOR x16
•
TYPE 0
•
TYPE 1
•
0000 - 9999
•

Table 7-5. Network Specifications

Data Rates
9.6 K – 20.0 Mbps
1.544, 2.048, 6.312, 8.448
Mbps
< 1.544
< 2048
n x 64 n = 1, 2, 3, 4, 5, 6, 8,
10,12, 15, 16, 20, 24, 30
64 K – 37.026 Mbps
All Rates
All possible combinations allowed.
NOTE: The DVB settings require the DVB NETWORK SPEC and the EBEM settings
require the EBEM NETWORK SPEC.
7–17
DMD1050TS Satellite Modem Board
Use to select the Tx spreading factor. This is only selectable
if the modem is set to output BPSK+LDPC.
Use one of the two built-in Pseudo PN patterns, 0 or 1.
Use to see the spreader chip rate.
Use to set the spreader's gold sequence number.
Framing Scrambler
None OM73
96 Kbps (IDR) V.35
1/15 (IBS) IESS-309
1/15 (IBS) IESS-309
EBEM EBEM
DVB DVB
Revision 1
Spectrum
MIL 188 165A
Intelsat
Intelsat
Intelsat
MIL 188 165A
DVB 0.25, 0.35
MN-DMD1050TS