Interface | RX Setup Page
BUFFER CLOCK SOURCES Section
Source 1 of 1
Source 2
Source 3
Source 4
Source 5
ASYNC Section
Async Mode
ES Interface
ES Baud Rate
ES Bits/Char
INSERT MAP Section – Not available on the DMD1050TS
Insert Mode
T1 / E1 Frame Scr
Sat Channel
Terr TSlot
Web Browser
SCTE (External)
•
SCT (Internal)
•
RX SAT
•
EXT BNC
•
EXT IDI
•
SCTE (External)
•
SCT (Internal)
•
RX SAT
•
EXT BNC
•
EXT IDI
•
SCTE (External)
•
SCT (Internal)
•
RX SAT
•
EXT BNC
•
EXT IDI
•
SCTE (External)
•
SCT (Internal)
•
RX SAT
•
EXT BNC
•
EXT IDI
•
SCTE (External)
•
SCT (Internal)
•
RX SAT
•
EXT BNC
•
EXT IDI
•
ES-ES
•
ESC ENHANCED
•
RS-232
•
RS-485
•
150 - 19200
•
7
•
8
•
N/A
N/A
N/A
N/A
7–45
DMD1050TS Satellite Modem Board
Use to assign priorities to the clock sources. The highest
priority is 1, and 5 is the last resort.
Use to assign priorities to the clock sources. The highest
priority is 1, and 5 is the last resort.
Use to assign priorities to the clock sources. The highest
priority is 1, and 5 is the last resort.
Use to assign priorities to the clock sources. The highest
priority is 1, and 5 is the last resort.
Use to assign priorities to the clock sources. The highest
priority is 1, and 5 is the last resort.
Read only; ES-ES is the normal IBS Async Channel. ESC
ENHANCED is applicable for Closed Net. It uses the
Overhead Signaling bytes in the IBS Overhead to pass
asynchronous data.
Read only; shows the interface type.
Read only; shows the baud rate in Enhanced Async Mode.
Read only: shows 7- or 8-bit data.
N/A
N/A
N/A
N/A
Revision 1
MN-DMD1050TS