Comtech EF Data DMD1050TS Installation And Operation Manual page 202

8.4.1.2 Future Key
Item
Future Key Signature
Future Seed Key
(write-only)
Confirm Future Seed
Key
(write-only)
Future Passphrase
(write-only)
TRANSEC Module HTTPS Interface
The user can program a second seed key and passphrase to generate a second set of
TEKs. These keys will lie dormant until the user activates them by clicking Activate
Future Key. At that time, the following happens:
1. The active TEKs are replaced by the ones generated with the Future Seed Key
and Future Passphrase.
The Current TEK gets reset to 1.
2.
3. Secondary modems connected to this one will also activate their Future Keys.
NOTE: The [Activate Future Key] button is active only when the following conditions are
met:
1. The modem is in Primary mode (see Encryption Mode, explained below).
2. The Current TEK is greater than 1.
Enter a 32-character Future Seed Key in this text box to generate a TEK when the
TRANSEC Module is given a Future Passphrase (described below).
Re-enter the newly created Future Seed Key in this text box to ensure its accuracy.
Once the Future Seed Key is entered and confirmed, click Update Seed Key to
finalize this change.
Accepts a 10- to 32-character Passphrase that is combined with the previously entered
Seed Key to generate TEKs.
Once the Passphrase is entered, click Update Passphrase to finalize this change.
8–6
DMD1050TS Satellite Modem Board
Description
Revision 1
MN-DMD1050TS