Real Time Transmission (Non Memory Transmission) - Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 User Manual

Real time transmission (Non memory transmission)

Your machine simply dials the other fax and when it makes contact, your machine feeds
the document through, scanning and transmitting it as it goes.
• With real time transmission, you can watch each page as it is scanned and sent.
To perform the real time transmission:
1
Switch to the Fax mode by pressing
2
Place the document on the ADF.
NOTE: • The document glass cannot be used for real time transmission.
• The document glass is available only for MFX-1330 model.
3
Obtain a dial tone, either:
• Press
– or –
Press the soft key in which "Monitor" is assigned.
–or–
• Lift the handset if you have connected an external telephone to your machine.
In either case, the machine shows:
**
_
– or –
Press
Then select "Off" and press
– or –
If you assigned "Memory Tx" to the soft key (page 8.2), turn off the memory transmis-
sion by simply pressing that key.
NOTE: "Monitor" is assigned to a soft key in F-300 model in the default setting.
4
Dial the fax number.
• Use the numeric keys to dial a number.
–or–
• Press one-touch key. (See page 3.6.)
–or–
• Press
–or–
• Use the phone directory dialing. (See page 3.11.)
NOTE: With real time transmission, only one destination can be dialed.
5
When you hear fax tones from the remote unit, press
If a person answers the phone, use the handset to tell that person that you are trying
to send a fax. When you hear fax tones, press
If the call fails and you used "Monitor" to dial, press
until "Monitor" appears, then press
is assigned to hang up.
If you are using the handset, hang up after pressing
NOTE: To cancel a transmission, use Review Commands features. (page 4.8)
4.6 S
ENDING FAXES
ADVANCED FUNCTIONS
Tel Mode **
repeatedly until "Memory Tx" appears and press
ADVANCED FUNCTIONS
ENTER
/ and three-digit code. (See page 3.8.)
SPEED DIAL GROUP
.
 
COPY FAX SCAN
repeatedly until "Monitor" appears, then press
to turn off the memory transmission.
.
START
or press the soft key to which "Monitor"
ENTER
START
.
START
repeatedly
ADVANCED FUNCTIONS
.
.
ENTER
.
ENTER