Using The Pid Wizard - Siemens SIMATIC S7 System Manual

Program instructions
7.9 PID
7.9.1

Using the PID wizard

Use the PID wizard to configure your PID loop
Screen
308
Description
In this dialog, you select which loops
to configure. You can configure a
maximum of eight loops.
When you select a loop on this dialog,
the tree view on the left side of the PID
wizard updates with all nodes neces-
sary for configuring that loop.
You can configure a custom name for
your loop. The default name of this
screen is "Loop x", where "x" is equal
to the loop number.
System Manual, V2.3, 07/2017, A5E03822230-AF
S7-200 SMART