Table 8- 20
Switch position = On: Termination and biased
①
Pin number
②
Network connector
③
Cable shield
8.6.5.7
Biasing and terminating the CM01 signal board
You can use the CM01 signal board to easily connect multiple devices to a network.
The signal board passes all signals (including the power pins) from the S7-200 SMART CPU
through to the programming port, which is especially useful for connecting devices that draw
power from the S7-200 SMART CPU (such as a TD 400C).
①
②
③
S7-200 SMART
System Manual, V2.3, 07/2017, A5E03822230-AF
Termination and bias switch positions
Terminal name
Terminal block
Cable shield
Switch position = Off: No termination or bias
Communication
8.6 RS485
463