Reference To The Analog Inputs Technical Specifications - Siemens SIMATIC S7 System Manual

PLC device configuration
6.1 Configuring the operation of the PLC system
Alarm configuration
You select whether to enable or disable the following alarms for the selected channel of the
selected module:
● Upper limit exceeded (value > 32511)
● Lower limit exceeded (value < -32512)
● User power (Configured in the system block "Module Parameters" node; see the figure
below.)
6.1.9

Reference to the analog inputs technical specifications

For further information on analog Input configuration options, refer to the following technical
specifications:
● Range: "Measurement ranges of the analog inputs for voltage and current (SB and SM)"
(Page 749)
● Rejection: "Sample time and update times for the analog inputs" (Page 749)
● Smoothing: "Step response of the analog inputs" (Page 748)
150
System Manual, V2.3, 07/2017, A5E03822230-AF
S7-200 SMART