Getting started
2.1 Connecting to the CPU
2.1.1.3
Setting up Ethernet communication with the CPU
From STEP 7-Micro/WIN SMART, use one of the following methods to display the Ethernet
"Communications" dialog for configuring communication to the CPU.
● From the project tree, double-click the "Communications" node.
● Click the "Communications" button
● Select "Communications" from the "Component" drop-down list in the Windows area of
the "View" menu ribbon strip.
The "Communications" dialog provides two methods of selecting the CPU to be accessed:
● Click the "Find CPUs" button to have STEP 7-Micro/WIN SMART search your local
network for CPUs. The IP address of each CPU found on the network is listed under
"Found CPUs".
● Click the "Add CPU" button to manually enter the access information (IP address and so
forth) for a CPU that you wish to access. The IP address for each CPU, manually added
with this method, is listed under "Added CPUs" and is retained.
34
from the navigation bar.
System Manual, V2.3, 07/2017, A5E03822230-AF
S7-200 SMART