Analog Module Inputs - Siemens SIMOCODE pro System Manual

Motor management and control devices

Hide thumbs Also See for SIMOCODE pro:

Table of Contents

Analog module inputs

SIMOCODE pro has an "AM Inputs" function block with two analog sockets,

corresponding to the two analog inputs of the analog module. The effective

analog value of each input can be read from these sockets and processed

internally. An additional binary socket of the function block represents the

status of the analog measuring circuits. The analog values can be processed

internally and/or transmitted cyclically to the automation system via the

"Cyclic Send" function blocks.

The "AM Inputs" function block can only be used if the respective analog

module (AM) has been connected and configured in the device

configuration!

The following schematic shows the "AM Inputs" function block:

Fig. 7-10: Schematic of the "AM Inputs" function block

Input signal

Open circuit

Active inputs

Open circuit

GWA 4NEB 631 6050-22 DS 03

SIMOCODE pro