Technical Specifications; Standards And Approvals - Siemens SIMATIC ET 200SP Operating Instructions Manual

Technical specifications

13.1

Standards and approvals

Introduction
The general technical specifications cover the following:
• The standards and test values that the CPU 1515SP PC2 complies with and fulfills.
• The test criteria according to which the CPU 1515SP PC2 was tested.
Currently valid markings and approvals
Note
Information for CPU 1515SP PC2
The currently valid markings and approvals are printed on the CPU 1515SP PC2.
Safety information
Risk of personal injury and damage to property.
In hazardous areas, there is a risk of injury or damage if you disconnect any connectors while
the CPU 1515SP PC2 is in operation.
Always de-energize the CPU 1515SP PC2 operated in such areas before you disconnect the
connectors.
Flying sparks due to loose cables
Risk of explosion in hazardous areas.
USB cables and PROFINET connectors may detach from the device in the case of strong
oscillation and high vibrating loads.
Attach these cables to the strain relief of the device using cable ties.
CPU 1515SP PC2 (F/T/TF)
Operating Instructions, 03/2023, A5E42603425-AC
WARNING
WARNING
13
79