Ncu/Ppu Access (Configuration) - Siemens SINUMERIK 840D sl Operating Manual

You will find additional information on package execution in the section under Package
execution (Page 317).
Figure 4-18
Buttons for the package processing dialogs
Information on the general buttons in the dialogs can be found under Meaning of buttons
(Page 126).
4.4.2.14

NCU/PPU access (configuration)

This dialog page enables access to the NCU in the case of SINUMERIK 840D sl or the PPU
in the case of SINUMERIK 828D.
You can configure the following property groups for the "NCU/PPU access" dialog page:
● Dialog
● Operating instructions
● Address
● Login information
● Dialog scripts
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
PCU access - commissioning engineer / operator view
Create MyConfig - Expert
4.4 Project folder
139