Topo - Operation; Creating A Topology - Siemens SINUMERIK 840D sl Operating Manual

Create MyConfig - Topo

6.4 Topo - operation

Designation
Manage NC data...
Comparison
Refresh
Edit configuration
Select configuration
Tools
Options...
Load module catalogs
Help
Contents...
About...
6.4 Topo - operation
6.4.1

Creating a topology

Topo offers the option of creating a new topology from the module catalog.
Furthermore, it is possible to import and edit a topology from an electrical design system or
directly from a control via an archive.
The topology can also be displayed from a drive archive, imported, or directly imported from
a control and subsequently edited. In this case, the original component numbers and article
362
Meaning
Ctrl+Alt+N Opens the "NC data - Topo project" dialog.
The view of the dialog is identical to the view under Diff. Machine
data or parameters are displayed for processing.
Light gray parameters with the identifier "calculated" are auto‐
matically processed by Topo and cannot be changed.
If the drive data is deleted, the DO is empty.
It is not possible to add parameters.
Ctrl+D
Ctrl+M Opens the dialog "Configuration - Topology comparison", in
which you can manage the comparison configurations (i.e. cre‐
ate, edit, delete, etc.).
Topology compari‐ Compares the currently displayed topologies and switches over
son into the compare mode.
Complete compari‐ You can find additional information under Topology compari‐
son (Page 373).
son
To display several topologies, select these in the list of topolo‐
gies using the <Ctrl> key and a mouse click. A maximum of two
topologies can be compared simultaneously.
Opens the "Options" dialog, which offers the option of making
basic settings, such as language and color changes to the
graphical representation, in the following tabs:
● Topology graph
● Axis-drive assignment
● Messages
● Language
Opens a list of the available module catalogs for SINUMER‐
IK 828D and SINUMERIK 840D sl, with specification of the CNC
and catalog version.
<F1> Calls the online help of the Topo program.
Contains information on the version and copyright.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD