Copy - Siemens SINUMERIK 840D sl Operating Manual

Create MyConfig - Expert
4.5 Component editor
4.5.5

Copy

Copy action
The "Copy" action enables folders and files to be copied into the target area.
With the help of the context menu, you can insert folders and files in the component as a copy
or link under the target area nodes.
Note
Renaming linked folders
Linked folders can be subsequently renamed in the component.
This renaming is necessary if the folder on the control system is to have a different name than
in your database to which it is linked.
Note
Selected data areas define target areas
Which target areas are displayed depends on the data areas (archive, PCU, NCU) that were
activated for use.
The data areas are defined in the project folder in the Package tab (Page 106).
If a data area is subsequently deactivated, then all of the target area nodes that cannot be
hidden due to content are shown in red.
Note
Display of the target area
● Gray - target area does not contain any data.
● Red - data inserted in the target area is not permissible.
● Blue - linked data with resolution for deployment.
● Purple - linked data with resolution during runtime.
Copy context menu
New
Insert in project
226
Creates a folder in which data can subsequently be stored as copy
or link.
Permits adding of folders and files to the project.
The data is not linked in the process. Instead, it is copied to the
component. Archive contents can also be imported via this entry.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD