Sinamics Topology (Configuration) - Siemens SINUMERIK 840D sl Operating Manual

Figure 4-32
Buttons for the package processing dialogs
Information on the general buttons in the dialogs can be found under Meaning of buttons
(Page 126).
4.4.2.28

SINAMICS topology (configuration)

You can configure the following property groups for the "SINAMICS topology" dialog page:
● Dialog
● Axis-drive assignment
● Comparison topology (*.ust)
● User-specified topology (*.utz)
● DO variables
● Dialog scripts
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
Notes on the topology - commissioning engineer / operator view
Create MyConfig - Expert
4.4 Project folder
169